McIntosh UR12 Uživatelský manuál stáhnout pdf (Strana 5)

Com Port Number Memory Location IRQ Number

1 3F8 4

2 2F8 3

3 3E8 4

4 2E8 3

Figure 1

Chapter 1

Buttons, Screens and/or Pages you design are easily trans-

ferred to the UR12 Remote Control. Layouts that are stored

in the UR12 Remote Control can be uploaded to the PC for

manipulation and storage. Before data can be transfered

between the UR12 Designer Software and the UR12 Re-

mote Control, the PC used must have a spare Serial Port

that can be made active with the correct port settings. Refer

to figure 1.

Note: Changes may have to be made in the PC’s BIOS for

making a Serial Port active, refer to the Owner’s

Manual that was supplied with your PC and/or consult

with the manufacture of the PC for assistance. Refer to

figure 1 for Standard Com (Serial) Port Settings.

Check to ensure that your PC’s Windows Port Settings con-

form to the following, refer to figure 2.

1. Click on the Windows Start Button.

2. Click on Settings.

3. Click on Control Panel.

4. Click on System.

5. Click on Device Manager.

6. Click on Ports.

7. Click on Communications.

8. Select the desired Com (Serial Port).

9. Select Properties.

10. Select Port Settings.

Serial Ports Selection and Settings

Parameter Setting

Bits per Second 115200

Data Bits 8

Parity None

Stop Bits 1

Flow Control Xon/Xoff

Figure 2

Start the McIntosh UR12 Designer Program by clicking on

the UR12 Desktop Icon or from the Windows START

MENU. Select TOOLS and then SETTINGS from the

UR12 Designer Program Main Menu Bar. Refer to figures

3 and 4.

Note: If the desired Serial Port, Com 1 is recommended, is not

functioning it may require troubleshooting of the

computer to resolve the Serial Port Conflict.

Figure 4

Figure 3

1 2 3 4 5 6 7 8 9 10 ... 15 16

Komentáře k této Příručce

Žádné komentáře

McIntosh UR12 Uživatelský manuál Strana 5

Komentáře k této Příručce

Související produkty a manuály pro ne McIntosh UR12